Mohammad Vaseem

Research Scientists

Research Interests

​• Tuning Ink chemistry/Ink-formulation based on metal, metal oxide and dielectric materials 
• Inkjet Printed devices supported on paper and plastic electronics  
• Printed transistors, conductors,  RFID and sensors

Selected Publications

Journal Publication:

• Mohammad Vaseem, Ahmad Umar, Sang Hoon Kim, Yoon-Bong Hahn “Low-Temperature Synthesis of Flower-Shaped CuO Nanostructures by Solution Process: Formation Mechanism and Structural Properties” Journal of Physical Chemistry C, Vol. 112, pp. 5729-5735, 2008.
• M. Vaseem, A. Umar, Y. B. Hahn, D.H. Kim, K. S. Lee, J. S. Jang, J. S. Lee “Flower-shaped CuO nanostructures: Structural, photocatalytic and XANES studies” Catalysis Communications, Vol. 10, pp. 11-16, 2008.
• Ahmad Umar, M. M. Rahman, Mohammad Vaseem, Yoon-Bong Hahn “Ultra-sensitive cholesterol biosensor based on low-temperature grown ZnO nanoparticles” Electrochemistry Communications, Vol. 11, pp 118-121, 2008.
• Mohammad Vaseem, Dae Young Kim Kil Mok Lee, Yoon-Bong Hahn, “Parametric study of cost-effective synthesis of crystalline copper nanoparticles and their crystallographic characterization” Materials Chemistry and Physics, Vol. 125, pp. 334-341, 2011.
• Mohammad Vaseem, Kil-Mok Lee, Jin-Koog Shin, and Yoon-Bong Hahn, “Synthesis of ZnO Nanoparticles and Their Ink-Jetting Behavior” Journal of Nanoscience and Nanotechnology, Vol. 12, pp. 2380-2386, 2012.
• Mohammad Vaseem, Kil Mok Lee, A-Ra Hong, and Yoon-Bong Hahn, “Inkjet Printed Fractal-Connected Electrodes with Silver Nanoparticle Ink” ACS Applied Material & Interfaces, Vol. 4, pp. 3300-3307, 2012.
• Mohammad Vaseem, A.-Ra Hong, Ryun-Tak Kim, Yoon-Bong Hahn, “Copper oxide quantum dot ink for inkjet-driven digitally controlled high mobility field effect transistors” Journal of Materials Chemistry C, Vol. 1, pp. 2112-2120, 2013.
• Mohammad Vaseem, Nirmalya Tripathy, Gilson Khang, YB Hahn, “Green Chemistry of Glucose-Capped Ferromagnetic hcp-Nickel Nanoparticles and Their Reduced Toxicity” RSC Advances, Vol. 3, pp. 9698-9704, 2013.
• Mohammad Vaseem, Rafiq Ahmad, Nirmalya Tripathy, Yoon-Bong Hahn, “Wide linear-range detecting non-enzymatic glucose biosensor based on CuO nanoparticles inkjet-printed on electrodes” Analytical Chemistry, Vol. 85, pp. 10448-10454, 2013.
• Mohammad Vaseem, Garret Mckerricher and Atif Shamim, “Robust Design of a Particle Free Silver-Organo-Complex Ink with High Conductivity and Inkjet Stability for Flexible Electronics” ACS Applied Material & Interfaces, Vol. 8, pp 177-186, 2016.
• Garret Mckerricher, Mohammad Vaseem, and Atif Shamim, “Fully inkjet-printed microwave passive electronics” Microsystems & Nanoengineering, Vol. 3, 16075, 2017
• Mohammad Vaseem, Farhan A Ghaffar, Atif Shamim “Iron Oxide Nanoparticle-Based Magnetic Ink Development for Fully Printed Tunable Radio-Frequency Devices” Advanced Materials Technologies, Vol. 3, 1700242-1700252, 2018.
• Farhan A Ghaffar, Mohammad Vaseem, Langis Roy, Atif Shamim “Design and Fabrication of a Frequency and Polarization Reconfigurable Microwave Antenna on a Printed Partially Magnetized Ferrite Substrate” IEEE Transactions on Antennas and Propagation, Vol. 66, 4866-4871, 2018.
• Shuai Yang, Mohammad Vaseem, Atif Shamim “Fully Inkjet-Printed VO2-Based Radio-Frequency Switches for Flexible Reconfigurable Components” Advanced Materials Technologies, Vol. 4, 1800276, 2019.
• Mohammad Vaseem, Su Zhen, Weiwei Li, Shuai Yang, Atif Shamim “Development of VO2-Based Phase-changed Materials and Its Ink-preparation for Printed Electronics” Advanced Electronic Materials, Vol. 5, 1800949, 2019.

Book Chapters:

• M. Vaseem, Ahmad Umar and Yoon-Bong Hahn, “Zinc Oxide Nanoparticles: Growth, Properties and their Applications” in “Metal Oxide Nanostructures and Their Applications”, Edited by Ahmad Umar and Y. B. Hahn, Volume 5, Chapter 4, pages 1-36 (2009), American Scientific Publishers, USA.
• Ahmad Umar, M. Vaseem and Yoon-Bong Hahn, “Growth, properties and Applications of copper and nickel oxide and hydroxide nanostructures” in “Metal Oxide Nanostructures and Their Applications”, Edited by Ahmad Umar and Y. B. Hahn, Volume 2, Chapter 2, pages 1-39 (2009), American Scientific Publishers, USA.
• Mohammad Vaseem and Atif Shamim, “Printed Electronics” in “Handbook of Flexible and Stretchable Electronics”, Edited by Muhammad M. Hussain and Nazek El-Atab, Chapter 6, pages 111-141 (2019), CRC Press | Taylor & Francis Group LLC

• Yoon-Bong Hahn and Mohammad Vaseem “Methods of Preparing P-type ZnO Nanoparticles and Ink Formulation Using the Same” Korean Patent (Registration Number: KR 10-1410034)
• Yoon-Bong Hahn, Mohammad Vaseem, A-Ra Hong “Fabrication of CuO Nanoparticles and Thereof Ink and Microwave-Irradiated Reduction of CuO Films into Metallic Cu films” Korean Patent (KR Grant: KR101582637B1, WO Application: WO2015016404A1)
• Mohammad Vaseem, Garret McKerricher, Atif Shamim, “Silver-organo-complex ink with high conductivity and inkjet stability” US Patent Application No. US20180312710A1, Publication Date: Nov. 1, 2018.
• Mohammad Vaseem, Farhan Abdul Ghaffar, Atif Shamim, “Iron Oxide Nanoparticle-Based Magnetic Ink For Additive Manufacturing” US Patent Application No. US20190259517A1, Publication Date: Aug 22, 2019. 
• Mohammad Vaseem, Shuai Yang, Atif Shamim, “Vanadium Oxide Nanoparticle-Based Ink Compositions” WO Patent Application No. WO2019180645A1, Publication Date: Sep. 26, 2019.


​• Ph.D. Feb. 2011, Department of Chemical Engineering, Chonbuk National University, South Korea
• M.S. 2005, Department of Chemistry, Aligarh Muslim University, India. 
• B.Sc. (Hons.) 2003, Department of Chemistry, Aligarh Muslim University, India. 

Professional Profile

​• Postdoctoral Fellow at Department of BIN Fusion Technology with World Class University (WCU) project, Chonbuk National University, South Korea (April 2011-July 2013)
• Post Doctoral Fellow at School of Semiconductor and Chemical Engineering with BK21 Center for Future Energy Materials and Devices project, Chonbuk National University, South Korea (Sep 2013-Dec 2014)
• Postdoctoral Fellow at Electrical Engineering, King Abdullah University Of Science & Technology (KAUST), Saudi Arabia (Jan 2015-Dec 2018)​


​• Best Presentation Award, “Ink-Jet Printing: An Efficient Way for Various Device Fabrication” BIN Fusion Technology Workshop, Korea (May 17-18, 2012).
• Best Poster Presentation Award, “High Mobility p-CuO Quantum Dots Based Field Effect Transistors Inkjet-Printed on Si/SiO2 and Flexible Substrates” Nano Korea Symposium (July 10-12, 2013, COEX Seoul, Korea).
• Best Poster Presentation Award, “Inkjet Printed Fractal-Connected Electrodes with Silver Nanoparticle Ink” 37th International Conference & Exposition on Advanced Ceramics and Composite-2013 (ICACC’13) Florida, USA (January 27- February 1, 2013).
• Best Poster Presentation Award, “Nonenzymatic Glucose Biosensor Based on CuO Nanoparticles Inkjet-Printed on Silver Electrodes” International Workshop on Flexible & Printed Electronics (IWFPE), Jeonju, Korea (November 20-22, 2013).