Conference Proceedings

 


  1. A. Meredov, G. Jayaswal, and A. Shamim, "Study of Field Enhancement in Overlapped Bowtie Antenna for infrared Harvesting Applications," in Proc. Antennas Propag. Soc. Int. Symp., San Diego, CA, 2017

  2. K. Klionovski, M. F. Farooqui and A. Shamim “Back Radiation Suppression through a Semi-Transparent Round Ground Plane for a mm-Wave Monopole Antenna,” in Proc. Antennas Propag. Soc. Int. Symp., San Diego, CA, 2017.

  3. K. Klionovski, A. Shamim and M. S. Sharawi “5G Antenna Array with Wide-Angle Beam Steering and Dual Linear Polarizations,” in Proc. Antennas Propag. Soc. Int. Symp., San Diego, CA, 2017.

  4. O.M.Sanusi, F.A.Ghaffar, A.Shamim, Y.Wang, and L.Roy, "Development of 2.45 GHz Compact Antenna for Wireless Sensors", International Conference on Electromagnetics in Advanced Applications (ICEAA) 2017. (Accepted)

  5. M. A. Karimi, M. Arsalan and A. Shamim, "A Low Cost, Printed Microwave Based Level Sensor with Integrated Oscillator Readout Circuitry", International Microwave Symposium, (IMS) 2017. (Accepted)

  6. M. A. Karimi, M. Arsalan and A. Shamim, "A Low-cost, Orientation-insensitive Microwave Water-cut Sensor Printed on a Pipe Surface", International Microwave Symposium, (IMS)2017. (Accepted)

  7. Muhammad Fahad Farooqui, Atif Shamim, "3D Inkjet Printed Disposable Environmental Monitoring Wireless Sensor Node"  IMS 2017. (Accepted)

  8. Farhan A. Ghaffar, M. Vaseem, J. Bray and A. Shamim, “A Half Mode Inkjet Printed Tunable Ferrite Isolator”, IEEE MTT-S International Microwave Symposium, (IMS) 2017.(Accepted)

  9. B. Krykpayev, M.F. Farooqui, R. M. Bilal and A. Shamim, “A WiFi Tracking Device Printed Directly on Textile for Wearable Electronics Applications,” LOPEC, April 2017.

  10. M. F. Farooqui, M. Vaseem, A. Shamim, “A Fully Printed Tunable RF Inductor Using Fe2O3 Nanoparticles and Silver-Organo-Complex Ink,” LOPEC, April 2016.

  11. M. F. Farooqui and A. Shamim, "Low-Cost Inkjet-Printed Wireless Sensor Nodes for Environmental and Health Monitoring Applications", IEEE IWAT, March 2017. 

  12. Su Zhen, A. Shamim, “Design Methodology of Single-feed Compact Near-Isotropic Antenna Design,” IEEE EuCAP, March 2017.

  13. A. Bakytbekov, A. Shamim,“Fully Inkjet Printed Wide Band Cantor Fractal Antenna for RF Energy Harvesting Application,” IEEE EuCAP, March 2017.

  14. M. Sallam, M. Serry, A. Shamim, S. Sedky, and E. Soliman, “Novel Micromachined On-Chip 10-Elements Wire-Grid Array Operating at 60 GHz" IEEE EuCAP, March 2017.

  15. M. F. Farooqui and A. Shamim, "A 3D Printed Near-Isotropic Antenna for Wireless Sensor Networks", ISAP, October 2016.

  16. M. Vaseem, G. McKerricher, A. Shamim, "3D Inkjet Printed Radio Frequency Inductors and Capacitors", EuMC, October 2016.

  17. M. Sallam, M. Serry, A. Shamim, S. Sedky, and E. Soliman, "On-Chip Micromachined Dipole Antenna with Parasitic Radiator for mm-Wave Wireless Systems",  IEEE Middle East Conference on Antennas and Propagation, MECAP, Sep, 2016 .

  18. F. A. Ghaffar, M. Vaseem and A. Shamim, "A Magnetic Nano-Particle Ink for Tunable Microwave Applications", IEEE Middle East Conference on Antennas and Propagation, MECAP, Sep, 2016 .

  19. M.F. Farooqui, A. Shamim, "Inkjet Printed Wireless Smart Bandage. Mr. Muhammad Farooqui", IEEE Middle East Conference on Antennas and Propagation, MECAP, Sep, 2016 . (Best paper award)

  20. M. A. Karimi and A. Shamim, "A flexible inkjet printed inverted-F antenna on textile", IEEE Middle East Conference on Antennas and Propagation, MECAP, Sep, 2016 .

  21. M.F. Farooqui, A. Shamim,  "3D Printed Helical Antenna with Lens" IEEE Middle East Conference on Antennas and Propagation, MECAP, Sep, 2016.

  22. F. A. Ghaffar, M. Vaseem, M. F. Farooqui and A. Shamim, "A Fully Printed Ferrite Nano-Particle Ink Based Tunable Antenna", IEEE International Symposium on Antennas and Propagation, AP-S/URSI, 2016.

  23. F. A. Ghaffar, A. Nafe and A. Shamim, "Ferrite LTCC based phased array antennas", IEEE International Symposium on Antennas and Propagation, AP-S/URSI, 2016.
  24. M. A. Karimi and A. Shamim "A flexible inkjet printed antenna for wearable electronics applications", IEEE International Symposium on Antennas and Propagation, AP-S/URSI, 2016.
  25. B. Krykpayev, M.F. Farooqui, R. M. Bilal and A. Shamim,"A WiFi Tracking Device Printed Directly on Textile for Wearable Electronics Applications" May 2016. 
  26. M.F. Farooqui, A. Shamim, "Low Cost Inkjet Printed Smart Bandage for Wireless Monitoring of Chronic Wounds", IEEE MTT-S International Microwave Symposium (IMS), May 2016. 
  27. M. A. Karimi, M. Arsalan, A. Shamim, "A low cost and pipe conformable microwave-based water-cut sensor",  IEEE MTT-S International Microwave Symposium (IMS), May 2016. (Best Student Paper Award, Third Place )
  28. F. A. Ghaffar, S. Yang, H. M. Cheema and A. Shamim, "A 24 GHz CMOS Oscillator Transmitter with an Ink-jet Printed On-chip Antenna", IEEE MTT-S International Microwave Symposium (IMS), May 2016.
  29. F. A. Ghaffar, M. Vaseem and A. Shamim, "A Ferrite Nano-particle based Printing Process for Tunable Microwave Components", IEEE MTT-S International Microwave Symposium (IMS), May 2016.
  30. A. Quddious, M. M. Khan, A. A. Tahir, A. Shamim, "An Inkjet Printed Meandered Dipole Antenna for RF Passive Sensing Applications", European Conference on Antennas and Propagation (Eu-CAP), April, 2016 .

  31. F. A. Ghaffar , A. Hussain, M. Hussain, A. Shamim, "A Stretchable and Flexible Polymer Based Monopole Antenna for Wearable Applications", European Conference on Antennas and Propagation (Eu-CAP), April, 2016.

  32. M. Vaseem, G. McKerricher, and A. Shamim, "Formulation of a Particle Free Silver Ink for Inkjet Printed Electronics" LOPEC-2016 (Large-area, Organic & Printed Electronics Convention), April 2016.

  33. G. McKerricher, A. Nafe, A. Shamim, “Lightweight 3D Printed Microwave Waveguides and  Waveguide Slot Antenna,” presented in IEEE Antennas & Propagation Symposium, Jul 2015. [IEEE Link]

  34. M.F. Farooqui, A. Shamim, "A 3D Printed Helical Antenna with Integrated Lens", IEEE International Symposium on Antennas and Propagation, AP-S/URSI, pp. 324-325, Jul 2015. [IEEE Link]
  35. F. A. Ghaffar, A. Shamim, "A Self-biased 3D Tunable Helical Antenna in Ferrite LTCC Substrate", IEEE International Symposium on Antennas and Propagation, AP-S/URSI, pp. 2291-2292, Jul 2015. [IEEE Link]
  36. H. M. Cheema, F. A. Ghaffar, M. Arsalan, A. Shamim, " A 94 GHz CMOS Based Oscillator Transmitter with an On-Chip Meandered Dipole Antenna", IEEE International Symposium on Antennas and Propagation, AP-S/URSI, pp. 1456-1457, Jul 2015. [IEEE Link]
  37. Mai O. Sallam, Mohamed Serry, Sherif Sedky, A. Shamim, Walter De Raedt, Guy A. E. Vandenbosch, and Ezzeldin A. Soliman*, “High Efficiency On-Chip Dielectric Resonator Antennna using Micromachining Technology,” presented in IEEE Antennas & Propagation Symposium, Jul 2015.
  38. F. A. Ghaffar and A. Shamim, "Theory and Design of a Half-Mode SIW Ferrite LTCC Phase Shifter ", IEEE MTT-S International Microwave Symposium (IMS), (Accepted), 17-22 May 2015. [IEEE Link]
  39. E. Arabi, and A. Shamim " A Planar and Tunable Bandpass Filter on a Ferrite Substrate with Integrated Windings" IEEE, MTT-S International Microwave Symposium (IMS), 17-22 May 2015. [IEEE Link]
  40. M. Nafe,  M.F. Farooqui, A. Shamim,Tunable Inkjet-Printed Slotted Waveguide Antenna on a Ferrite SubstrateEuropean Conference on Antennas and Propaagation (EuCAP), pp. 1-3, Apr 2015. [IEEE Link]
  41. G. McKerricher D. Titterington, A. Shamim, "A 3D Printed Microstrip Patch Antenna", European Conference on Antennas and Propaagation (EuCAP) 2015.
  42. M. Gadalla, A. Shamim*, "28.3THz Bowtie Antenna Integrated Rectifier for Infrared Energy Harvesting," IEEE European Microwave Conference, Oct 2014. [IEEE Link]
  43. E. Arabi, G. Mckerricher, and A. Shamim, "Comparison of filters: inkjet printed on PEN substrate versus a laser-etched on LCP substrate", European Microwave conference, pp.1226-1229, 6-9 Oct. 2014 [IEEE Link]
  44. G. McKerricher, D. Conchouso, B. Cook, I. Foulds, A. Shamim, “Crude Oil Water-Cut Sensing with Disposable Laser Ablated and Inkjet Printed RF Microfluidics," IEEE MTT-S International Microwave Symposium (IMS), pp.1-3, 1-6 June 2014. [IEEE Link]
  45. M. F. Farooqui, A. Nafe, A. Shamim, "Inkjet Printed Ferrite-Filled Rectangular Waveguide X-Band Isolator," IEEE MTT-S International Microwave Symposium (IMS), pp.1-4, 1-6 June 2014. [IEEE Link]
  46. M. F. Farooqui, A. Shamim, "Inkjet Printed Circularly Polarized Antennas for GPS Applications," IEEE International Symposium on Antennas and Propagation, AP-S/URSI, pp.856-857, 6-11 July 2014. [IEEE Link]
  47. M. F. Farooqui,  A. Shamim, "An Inkjet Printed Near Isotropic 3-D Antenna with Embedded Electronics for Wireless Sensor Applications," IEEE International Symposium on Antennas and Propagation, AP-S/URSI, pp.326-327, 6-11 July 2014 [IEEE Link]
  48. F. A. Ghaffar, Joey R. Bray, Atif Shamim, "Design Strategy for a Tunable Antenna on a Partially Magnetized Ferrite LTCC Substrate ", IEEE International Symposium on Antennas and Propagation, APS/URSI, pp.779,780, 6-11 July 2014. [IEEE Link ]
  49. F. A. Ghaffar, H. M. Cheema, M. Arsalan, K. N. Salama, A. Shamim, “60 GHz System-on-Chip (SoC) with Built-in Memory and an On-chip Antenna,” IEEE European Conference on Antennas & Propagation (EuCAP), pp.531-532, 6-11 April 2014. [IEEE Link]
  50. Mohammed Abdulaal, Mohammed Algarni, Atif Shamim, Christian Claudel, " Unmanned Aerial Vehicle based flash flood monitoring using Lagrangian trackers, " First Workshop on Robotic Sensor Networks, 2014.
  51. G. McKerricher; Gonzalez, J.; Shamim, A., "All inkjet printed 3D microwave capacitors and inductors with vias," Microwave Symposium Digest (IMS), 2013 IEEE MTT-S International , vol., no., pp.1,3, 2-7 June 2013. [IEEE Link]
  52. M. F. Farooqui; Bilal, Rana Muhammad; Cheema, Hammad M.; Shamim, Atif, "A paper based inkjet printed real time location tracking TAG," Microwave Symposium Digest (IMS), 2013 IEEE MTT-S International , vol., no., pp.1,4, 2-7 June 2013 [IEEE Link]
  53. M. Arsalan; Ouda, M.H.; Marnat, L.; Ahmad, T.J.; Shamim, A.; Salama, K.N., "A 5.2GHz, 0.5mW RF powered wireless sensor with dual on-chip antennas for implantable intraocular pressure monitoring," Microwave Symposium Digest (IMS), 2013 IEEE MTT-S International , vol., no., pp.1,4, 2-7 June 2013 [IEEE Link]
  54. M. Arsalan; Ouda, M.H.; Marnat, L.; Shamim, A.; Salama, K.N., "Implantable Intraocular Pressure Monitoring systems: Design considerations," Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO), 2013 IEEE MTT-S International , vol., no., pp.1,3, 9-11 Dec. 2013 [IEEE Link]
  55. H, Abuzaid; Doghri, Ali; Wu, Ke; Shamim, Atif, "SIW based multilayer transition and power divider in LTCC technology," Microwave Symposium Digest (IMS), 2013 IEEE MTT-S International , vol., no., pp.1,3, 2-7 June 2013 [IEEE Link]
  56. M. F. Farooqui; Shamim, A., "Dual band inkjet printed bow-tie slot antenna on leather," Antennas and Propagation (EuCAP), 2013 7th European Conference on , vol., no., pp.3287,3290, 8-12 April 2013 [IEEE Link]
  57. H.F. Abutarboush; Shamim, A., "Conformal and green electronics: A wideband inkjet printed antenna on paper substrate," Antennas and Propagation (EuCAP), 2013 7th European Conference on , vol., no., pp.3099,3102, 8-12 April 2013 [IEEE Link ]
  58. H. Abtarboush,A. Shamim, "A novel wideband inkjet printed antenna for future flexible devices," Advanced Electromagnetic Symposium (AES), United Arab of Emirates, March 2013.
  59. H. Aboutarboush, A. Shamim*, "A novel wideband inkjet printed antenna for future flexible devices," Advanced Electromagnetic Symposium (AES), United Arab of Emirates, March 2013.
  60. Mena Gadalla, Atif Shamim,"Design Considerations For Near Field Enhancement and Localization in Nano-Antennas," Advanced Electromagnetic Symposium (AES), United Arab of Emirates, March 2013.
  61. M. F. Farooqui*, Atif Shamim, "Inkjet printed circularly polarized monopole antenna on paper for GPS applications," Advanced Electromagnetic Symposium (AES), United Arab of Emirates, March 2013.
  62. Cook, B. S., Shamim, A., "An inkjet-printed UWB antenna on paper substrate utilizing a novel fractal matching network," Antennas and Propagation Society International Symposium (APSURSI), 2012 IEEE , vol., no., pp.1,2, 8-14 July 2012.
  63. A. G. Radwan; Shamim, A.; Salama, K.N., "Impedance matching through a single passive fractional element," Antennas and Propagation Society International Symposium (APSURSI), 2012 IEEE , vol., no., pp.1,2, 8-14 July 2012 [IEEE Link]
  64. Ghaffar, F.A.; A. Shamim ; Roy, L., "Study of LCP based flexible patch antenna array," Antennas and Propagation Society International Symposium (APSURSI), 2012 IEEE , vol., no., pp.1,2, 8-14 July 2012.
  65. L. Marnat, A. Shamim, “Liquid Crystal Polymer (LCP) Based Antenna for Flexible System on Package (SoP) Applications,”  ANTEM, Toulouse, France, pp. 1-4, June 2012. [IEEE Link]
  66. F. A. Ghaffar, A. Shamim, "A 60 GHz Wideband and Miniaturized CMOS Fractal Antenna," PIERS, KualaLumpur, March 2012.
  67. M. Sabeh, A. Shamim, "LCP-based Half Circle Fractal Patch Antenna for Wide Band Applications," PIERS, KualaLumpur, March 2012.
  68. H. F. Aboutarboushsh, H. Tawfik, E. Soliman, M. Sallam, A. Shamim and S. Sedky, “Effects of Wafer-Level Packaging on mm-Wave Antennas,” Loughborough Antennas & Propagation Conference (LAPC), Loughborough, UK, pp. 1-4, Nov 2011. [IEEE Link]
  69. E. Arabi. A. Shamim, “High Q, miniaturized LCP-based passive components, and filter design for SoP applications,” European Microwave Conference (EuMC), Manchester, UK, pp. 111-114, Oct 2011. [IEEE Link]
  70. A. G. Radwan, A. Shamim, K. N. Salama, “Mathematics Behind the Fractional-Order Smith Chart,” Progress In Electromagnetics Research Symposium (PIERS), Suzhou, China, pp. 155-159, Sept 2011. [PIERS Link]
  71. F. A. Ghaffar, A. Shamim, K. N. Salama, “ Design and Comparison of LTCC Based Fractal Antennas” URSI General Assembly and Scientific Symposium, Istanbul, Turkey, Aug 2011. [URSI Link]
  72. F. A. Ghaffar, A. Shamim, K. N. Salama, “A miniaturized wide-band fractal LTCC antenna,” IEEE ACES, Virginia, USA, Mar 2011. [ACES Link][PDF]
  73.  M. U. Khalid, A. Shamim, K. N. Salama, “24 GHz Multi-dielectric LTCC Fresnel Lens for Automotive Radar SoP Applications,” IEEE ACES, Virginia, USA, Mar 2011.
  74. J. Bray, A. Shamim, “Tunable Ferrite LTCC Embedded Phase Shifters and Isolators,” IEEE ACES, Virginia, USA, invited paper, Mar 2011. [ACES Link]
  75. F. A. Ghaffar, M. U. Khalid, A. Shamim, K. N. Salama, “Gain-Enhanced LTCC System-on-Package for Automotive UMRR Applications,” IEEE MWSCAS, Seattle, USA, pp.934-937, August 2010. [IEEE Link] [PDF]
  76. A. Shamim, M. Arsalan, L. Roy, K. N. Salma, “Co-design of On-chip Antennas and Circuits for a UNII Band Monolithic Transceiver ”, IEEE APS, Toronto, Canada, pp. 1-4, July 2010. [IEEE Link]
  77. A. Shamim; Salama, K.N.; Soliman, E.A.; Sedky, S., "On-chip antenna: Practical design and characterization considerations," Antenna Technology and Applied Electromagnetics & the American Electromagnetics Conference (ANTEM-AMEREM), 2010 14th International Symposium on , vol., no., pp.1,4, 5-8 July 2010. [IEEE Link]
  78. A. Shamim, M. Arsalan, L. Roy, “Wireless interconnect between on-chip and LTCC antennas for system-in-package applications”, IEEE EuWiT, Amsterdam, Netherlands, pp. 21-24, Oct 2008 (Overall Best Paper Prize Winner) [IEEE Link]
  79. A. Shamim, V. Karam, P. Popplewell, J. Rogers, L. Roy, C. Plett, “A CMOS Active Antenna/Inductor for System on a Chip (SoC) Applications”, IEEE APS, San Diego USA, pp. 1-4, July 2008. [IEEE Link]
  80. P. Popplewell, V. Karam, A. Shamim, J. Rogers, L. Roy, C. Plett, “A 5.2-GHz, BFSK Transceiver using Injection-Locking and an On-Chip Antenna,”  IEEE Journal of Solid State Circuits (JSSC), Apr 2008.
  81. A. Shamim, M. Arsalan, L. Roy, "5 GHz Monolithic CMOS Transmitter and Antenna for Short-Range Communications," IET EuCAP, Edinburgh, UK, pp.1-5, 11-16 Nov. 2007 (Invited paper) [IEEE Link]
  82. A. Shamim, M. Arsalan, L. Roy, "5.2 GHz VCO Transmitter with On-Chip Antenna for Biomedical Sensor Applications ", URSI, Ottawa Canada, Jul2007
  83. A. Shamim, J. Bray, N. Hojjat, L. Roy, "Microwave and Magnetostatic Characterization of Ferrite LTCC for Tunable and Reconfigurable SiP Applications", IEEE MTT-S, Hawaii USA, pp. 691-694, Jun 2007. [IEEE Link]
  84. V. Karam, A. Shamim, P. Popplewell, J. Rogers, C. Plett., "A 6.3 GHz BFSK Transmitter With On-Chip Antenna for Self Powered Medical Sensor Applications," IEEE RFIC, Hawaii USA, pp. 101-104, Jun 2007.
  85. P. Popplewell, A. Shamim,  J. Rogers, C. Plett,"A 5.2 GHz BFSK Receiver with On-Chip Antenna for Self-Powered RFID Tags and Med. Sensors," IEEE RFIC, Hawaii USA, pp. 669-672, Jun 2007. [IEEE Link]
  86. P. Popplewell, A. Shamim, V. Karam, J. Rogers, C. Plett., "An Injection-Locked 5.2 GHz SoC Transceiver with On-Chip Antenna for Self-Powered RFID and Medical Applications," IEEE VLSI, Kyoto Japan, Jun 2007. [IEEE Link]
  87. A. Shamim, M. Arsalan, G. Brzezina, L. Roy., "5.2 GHz Differential LTCC Antenna and Balun for Biomedical System in Package (SiP) Application", IEEE IWAT, Cambridge UK, pp. 443-446, Mar 2007. [IEEE Link]
  88. A. Shamim, J. Bray, N. Hojjat, L. Roy, "Evaluation of Ferrite LTCC SiP Technology for Microwave Applications", MMA Conference, Oulu Finland, Jun 2006.
  89. P. Popplewell, A. Shamim, V. Karam, J. Rogers, C. Plett, "A Self-Powered, 5.2 GHz, Lock and Roll Transceiver using Injection-Locking and On-Chip Antennas," IEEE ISCAS, Kos, Greece, pp. 5203-5206, Jun 2006.
  90. A. Shamim, V. Karam, J. Rogers, C. Plett, L. Roy, "Silicon Differential Antenna/ Inductor for Short Range Wireless Communication Applications", IEEE CCECE, Ottawa Canada, pp. 94-97, May 2006
  91. A. Shamim; Popplewell, P.; Karam, V.; Roy, L.; Rogers, J.; Plett, C., "5.2 GHz On-Chip Antenna/ Inductor for Short Range Wireless Communication Applications," Antenna Technology Small Antennas and Novel Metamaterials, 2006 IEEE International Workshop on , vol., no., pp.213,216, March 6-8, 2006
  92. A. Shamim, L. Roy, G. Tarr, "Silicon Substrate and Metallization Effects on 24 GHz On-Chip Antennas" CST Conference, Ottawa Canada, Aug 2005.
  93. A. Shamim, N. Fong, L. Roy, G. Tarr, "24 GHz differential integrated antennas in 10 ohm-cm bulk silicon", IEEE APS, Washington USA, pp. 536-539, Jul 2005 (Best Student Paper Finalist Prize). [IEEE Link]
  94. A. Shamim, N. Fong, L. Roy, G. Tarr, "On-chip antenna measurements: Calibration and De-embedding consideration", IEEE IMTC, Ottawa Canada, pp. 463-466, May 2005. [IEEE Link]
  95. A. Shamim, N. Fong, L. Roy, G. Tarr, "Si monolithic antenna calibration and de-embedding considerations", ANTEM, Ottawa Canada, pp. 97-100, Jul. 2004.
  
​​​​​​​​​​​​​​​​​​